How to Make Rainbow Loom Triple Single Without a Loom

this is a very easy project so that you can make a beautiful bracelet without the loom

Step 1: What You Need

you will need 2 forks (plastic or metal), bands, s or c clip, and your fingers!

Step 2: Preparing Materials

Place the two forks back to back and hold them in that position until you complete step 5

Step 3: Color Choices

Take your first color

Step 4: Twisting Band

twist your first band and make it into a figure eight.

Step 5: Placing Bands

place a band in a figure eight across all of your fork pegs on each side

Step 6: Placing the Bands

Take your next color and put it on the last tongs going straight across.

Step 7: Placing the Bands 2

place a band straight across the two middle tongs so your forks look like the ones above.

Step 8: Placing the Bands 3

place your background color (the color you started with) below the second Colour so you have second color on top and first color on the bottom

Step 9: Pulling Over Bands

Image 1: Pull your band that is under your second color on both sides

Image 2: You forks should look something like this image now

Image 3: Add another layer of bands on each side

Image 4: Add another band under the previous layer in image 3 and pull the purple (in my picture) bands over on each side of the fork

Image 5: You folks should look something like this image

Step 10: What It Should Look Like

Keep adding layers of bands as in step 9

This is what it should look like along the way :)

Don't forget to pull it down every 1 or 2 layers!

Have fun!