im waiting to the image to load so.... ahh its done yay haha and this gun shots about 7-17 feet distance~ for me. it depends how you make the bollet and how you blow on it.
Step 1: The paper used...
still waiting to the mini paper i use TO NOT USE that i took. if you use this paper well it will go about 7 feet. normal paper is about 10-17 feet.
Step 2: Make the 2 tube important!!!
- image go so slowwwwwwwwwwwwwwwwwwwwwwwww!........................... don t read you #!$@$!#
-you have nothing to do of your life!!!
-stop reading selfish noob
-Omg didn t I say stop reading...
- Ok fine i give up zZzZzZzZz.....
Step 3: Cut the 2 silenders
-cut the bigger 1 in like close in half and keep 1 end.
-then cut like um... half(long way <---->) til close to midle and go up
ARG 5 min later still not loaded image... morons.... jk? no. yes. idk... wath you looking at? nerds!!!
Step 4: Atach a part to help the sliding part #1
- make like a tube like the first one you made. but cut a sall part like um 1cm or 9mm not to much. and like i said a million times. take a normal size paper... zZzZzZzZzZz
Step 5: Atach a part to help the sliding part #2
- make a rectangle paper peace that will cover the lowest cilander half way. but cut like 1cm-9mm ~~~
i hope you like this instructable atless...
Step 6: The handle and clip.s.
- the clip isint a real working 1 its just to keep a couple of bollet
-i d k .........
- last pic= clip in the hadle and be sure the clip dont pop out 1" out of the handle and be sure the clip stay in the handle i made a octagone as the forme of the clip...