Print PDF
Favorite
Email
Step 2Structure of the Headpiece
The cardboard needs to get cut down to a bit large than the circumference of the size of your head. For me, this was about 22", so I began by cutting a piece of cardboard at 30"(width)x24"(height).
The cardboard needs to be scored lightly on one side about every inch or so going vertically. This will allow the structure to create a circle without ripping. Be sure to not score too deep- going through will cause the structure to fall apart easier.
After scoring- roll the cardboard and find the size you need to go around your head so that you can breathe easily and it will be comfortable. Mark this length- and glue.
The cardboard needs to be scored lightly on one side about every inch or so going vertically. This will allow the structure to create a circle without ripping. Be sure to not score too deep- going through will cause the structure to fall apart easier.
After scoring- roll the cardboard and find the size you need to go around your head so that you can breathe easily and it will be comfortable. Mark this length- and glue.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
