Print PDF
Favorite
Email
Step 4Center Diffuser Dish
From my understanding, this is where the magic happens. The diffuser bounces the light into the reflective material. It also creates the attractive catchlights in your model's eyes.
I didn't feel like breaking out the Dremel for this one, so I used packing tape to float the dish in the center of the larger bucket.
Start with two on opposite sides to get the center bowl, well, centered. Then start adding two pieces of tape at a time. This will make sure that the design stays close to the center, hopefully.
Et voila! you're finished.
Skip with sass!
I didn't feel like breaking out the Dremel for this one, so I used packing tape to float the dish in the center of the larger bucket.
Start with two on opposite sides to get the center bowl, well, centered. Then start adding two pieces of tape at a time. This will make sure that the design stays close to the center, hopefully.
Et voila! you're finished.
Skip with sass!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
