Print PDF
Favorite
Email
Step 5The Set Up
The best part about this rig is that it is easy to reuse and adjust the effect. Keep in mind that you can decide how much blood and air pressure goes into each "shot."
First open the valve on your air tank and screw on the filling adapter.
Any bike pump will fit our adapter. I haven't done a PSI test, but with my bike pump I could get a good 16 pumps in. Once you've filled the air tank, close the valve and unscrew the filling adapter. My rigs leak a little while pumping, but stops as soon I close the valve. Now your tank is ready to go.
First open the valve on your air tank and screw on the filling adapter.
Any bike pump will fit our adapter. I haven't done a PSI test, but with my bike pump I could get a good 16 pumps in. Once you've filled the air tank, close the valve and unscrew the filling adapter. My rigs leak a little while pumping, but stops as soon I close the valve. Now your tank is ready to go.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
