Print PDF
Favorite
Email
Step 6Sealing the elbow joint and filling the hose
Next we need to seal up the end of our elbow joint. Remember, this is where the blood will shoot out. Take two small pieces of plastic wrap and put them over the hole.
Secure the plastic wrap with one of the tiny rubber bands and trim the excess wrap with a pair of scissors. This seal needs to be tight enough for the blood not to leak but weak enough to pop off when we open up the air tank.
Using a funnel fill your blood hose with, well blood! My philosophy on blood...more is better. Position the elbow joint on your actor wherever you want blood to be spilt!
Secure the plastic wrap with one of the tiny rubber bands and trim the excess wrap with a pair of scissors. This seal needs to be tight enough for the blood not to leak but weak enough to pop off when we open up the air tank.
Using a funnel fill your blood hose with, well blood! My philosophy on blood...more is better. Position the elbow joint on your actor wherever you want blood to be spilt!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
