Introduction: How to Make a Bobby Pin Shooter Using a Straw

Picture of How to Make a Bobby Pin Shooter Using a Straw

An awesome bobby pin shooter that shoots pretty far

Step 1: Items Needed

Picture of Items Needed

A Bobby Pin (of course) , A Bendy Straw (optional) , Scissors , and a Rubber Band

Step 2: Step 1

Picture of Step 1

Start by bending your straw at an angle. If you dont have a bendy straw skip this step.

Step 3: Step 2

Picture of Step 2

After you bend it , Cut it to about this long.

Step 4: Step 3

Picture of Step 3

Now bend your Bobby Pin until it looks like this...

Step 5: Step 4

Picture of Step 4

Now attach a rubberband to your Bobby pin

Step 6: Step 5

Picture of Step 5

Now attach the pin onto the straw , Like this.

Step 7: Shooting It

Picture of Shooting It

Allow the bent part of the pin to rest on your middle finger. Then hold it tight. After that , you pull back the rubberband then fire!


About This Instructable




More by OmgNinja:How to make a Bobby pin Shooter Using a Straw
Add instructable to: