Introduction: Lego Gun

This will show you how to make a Lego Gun. The reason behind this project is to make a Lego gun from another Lego piece.

Note: This instructable was cleaned up on 5/6/2012.

Some other projects:

Step 1: Materials

Here is what you need:
  1. Sandpaper (or sandpaper texture)
  2. Pliers (or wire strippers)
  3. This Lego tool (look in picture)
Visit Lego Pick A Brick for parts.

Step 2: Cutting the Tool

In this step you will cut off the round part of the tool.
Here is what you do:
Take your pliers and begin to cut off the round part of the tool so that the flat side of the pliers is touching the round part. (Picture #1.)
When you cut about halfway then you can put your pliers down and just wiggle the round part till it comes apart from the other side.
this is what it should look like when you are done. ( Picture #2.)

Step 3: Cutting Off the Mess

In this step you will cut of some of the mess from your gun.
Here is what you do:
Slowly start cutting off the mess to make it look nicer.

Step 4: Sandpaper Time

In this step we will polish the gun.
Here is what you do:
Use sandpaper or a texture similar to sandpaper and sharpen the leftovers smooth so the gun would look better.

Step 5: Conclusion

Now you have learned how to make a Lego Gun. Please leave a comment and P.M. me if you have any questions!

Comments

author
AjKing (author)2013-08-21

Talking to iproberry1

author
AjKing (author)2013-08-21

But it looks like a gun...

author
Colson Chupp (author)2013-07-22

Awesome

author
lordtofthekill (author)2013-07-18

Or just go to brickarms.com they make accurate guns for Lego figures out of the same plastic, they are a very reliable company and are well known and respected among the Lego community. I hope u check them out!!

author

Yes I do know BrickArms! Its a very creative and new Lego idea, I like it. I did though create this instructable long before I had bought actual Lego Guns and before I knew about BrickArms.

author
dannypalmer2001 (author)2012-11-28

ok

author
mind.the.gap (author)2012-10-05

cool and creative

author
monsterlego (author)2011-12-20

Uhhhh... yeah, i think there is actually a non-modified lego piece like this, but has a trigger.

bug.jpg
author
iproberry1 (author)monsterlego2011-12-24

yes... but if you don't have that...or just want more

author
monsterlego (author)iproberry12011-12-25

I guess.

author
modaawesome (author)monsterlego2012-01-13

+1 for monster Lego the piece is in almost every modern set

author
iproberry1 (author)modaawesome2012-05-06

I think the piece looks like a hose...it's called the Nozzle W/Ø3.18, Shaft.

About This Instructable

6,547views

8favorites

License:

Bio: I build random things with LEGO's and post them here for others to recreate. Like the stuff I make? Then go ahead and follow ... More »
More by iproberry1:LEGO Pickup TruckLego BBQ GrillLego Car
Add instructable to: