Print PDF
Favorite
Email
Step 9
Cut all the wires back that are not connected to the keyless sockets. It is best to tag these wires from the very beginning so you don't cut something you shouldn't.
Strip the insulation of the "lit" wires, exposing about 3/4" of wire. Group your four neutral wires and then separately group your four hot wires. HOT WIRES=Smooth plastic coating NEUTRAL WIRES= ridged plastic coating
Create a "pig tail" from a small piece of wire. Using a 4"-6" scarp of wire strip the insulation from both ends. You can leave the two wires together in the center or you can pull them completely apart and have separate neutral and hot pigtails.
Attach the neutral pigtail to the group of neutral wires using a appropriately sized wire nut. Do the same for your hot wires.
Strip the insulation of the "lit" wires, exposing about 3/4" of wire. Group your four neutral wires and then separately group your four hot wires. HOT WIRES=Smooth plastic coating NEUTRAL WIRES= ridged plastic coating
Create a "pig tail" from a small piece of wire. Using a 4"-6" scarp of wire strip the insulation from both ends. You can leave the two wires together in the center or you can pull them completely apart and have separate neutral and hot pigtails.
Attach the neutral pigtail to the group of neutral wires using a appropriately sized wire nut. Do the same for your hot wires.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
