Instructables
loading
loading

Step 2: Ready for the next couple of steps?

Picture of Ready for the next couple of steps?
wrapping the wire around the power source.jpg
attaching the head to the power source.jpg
Now you have to strip the colored wires(with the Plyers)  so the you can see the bronze wires underneath then break the bronze wires with the Plyers and after that you have to rap the bronze wires around the battery and then silicon them to the battery then you silicon the battery to the light bulb and wait for them to dry. p.s make sure you keep it levitated because it makes it easier to move it. 
 
Remove these adsRemove these ads by Signing Up