Introduction: How to Make a DIY Sustain Pedal

Picture of How to Make a DIY Sustain Pedal

You will need:
-Sticky tape
-Scissors
-CD case
-Foil
-1/4 inch jack lead with the two connection on other end stripped to an inch
-Pen (optional)

Step 1: Step 1

Picture of Step 1

Wrap and stick foil around one flap of the CD case

Step 2: Step 2

Picture of Step 2

Repeat Step 1 on the other flap

Step 3: Step 3

Picture of Step 3

Get one connection from the 1/4 inch jack lead and tape it to any flap on the CD case

Step 4: Step 4

Picture of Step 4

Close the other flap like you would close a CD case but do not click it together. Also make sure the other connection is pointed up!

Step 5: Step 5

Picture of Step 5

Plug in the 1/4 inch jack lead

Step 6: Finished!

Picture of Finished!

Ta Dah!-Harry Fresco

Comments

About This Instructable

11,016views

11favorites

License:

Add instructable to: