Introduction: How to Make a Hair Clip Kangaroo!

I recently posted pics of a hair clip kangaroo i made a few weeks ago. here is how i did it. unfortunately the 1st step is the worst but once you get past it your in the clear. all you need is a hair clip, a good pair of pliers, and some very strong wire/metal cutters. If you have any questions or get stuck comment and ill do my best to help you.

Step 1:

the 1st and worst step. carefully cut the front of the clip in half.

Step 2:

when your done cutting the clip is should look like this! pliers make these steps MUCH easier than using your fingers!

Step 3:

Now for the last step, the head!

Comments

author
bcavaciuti made it! (author)2012-10-21

my sister only let me use her old ones and they all snapped on me :( but i ove your idea very creative :D

author
botguy24 made it! (author)botguy242012-10-22

that's to bad. :( but thanks for the positive feedback!

author
camefc made it! (author)2012-03-14

can you make it bounce?

author
botguy24 made it! (author)botguy242012-03-15

that would be soooo Awesome but no. :(

author
AussieAnglerGal made it! (author)2012-03-08

awwwww so cute!

author
botguy24 made it! (author)botguy242012-03-09

thanks :)

author
jessyratfink made it! (author)2012-03-01

Absolutely adorable! And great photos, too. :)

author
botguy24 made it! (author)botguy242012-03-02

Thanks! Glad you enjoined it!

About This Instructable

3,545views

25favorites

License:

More by botguy24:The do nothing car!Bakuki's mask.Rubix Companion cube!
Add instructable to: