With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
How to make a quick and simple Jewellery Roll with two zipped pockets, large pocket and ring holder. You will need - outer and lining fabric (I used ...
From outer fabric: 20x30cm for the exterior, 8x15cm for ring roll Lining fabric: 20x30cm for lining, 20x40cm for pocket panel, 2 pieces 20x20cm for u...
Lisa has a great tute here for sewing zips at U-Handblog - fold the pocket panel in half and mark the halfway point. I placed zips 3cm and 13 cm below...
Sew around the the zip opening and repeat for the upper pocket using an upper pocket piece. Pin the lower pocket piece you've just sewn to the pocket ...
Once stitched, snip open between the stitching as in the photo. Pull the pocket lining pieces through the openings and press.
Pin the zips in place in the openings. Use a zipper foot to sew around the edges of the zip opening. Make sure you pin the pocket linings out of the w...
Sew the lining for the zipped pockets to the back of the zippered compartments taking care not to sew anything else in along the way!
Press the pocket panel in half and topstitch along the fold.
Take the ring holder piece and fold in half lengthways, then fold in the raw edges and ends, and pin. Stitch around the edges to hold it all together....
Sew a piece of velcro to one of the ends, and sew the other end onto the lining panel. Sew the other piece of velcro to the lining panel. You could us...
Take the tie pieces and fold lengthways. Press the fold and fold the raw edges in, and press again (in the same way as the ring holder). Pin flat and ...
Pin the outer fabric and lining right sides together. Sew around the edges again taking care not to catch the ties. Leave a 10cm gap for turning. Trim...
Pin the opening together with ties pulled outside, press and pin round the edges of the jewellery roll. Topstitch round the edges taking care to catch...
Tag files as:
Posted:Jan 18, 2009
Jewellery display roll made with every day items.
Roller Printing Basics
Basic Head Pin
How To Build a Jewellery Box
Beginners Sawing and Piercing Project
Jewelry holders DIY- a chic booklet earring holder DIY
Handmade wire necklace
Start Wire onto Jewellery Project
Download our new apps for iOS and android!
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.