Instructables

How to make a Knex balisong

Picture of How to make a Knex balisong
IMG_4089.JPG
This is a Knex balisong that works exactly like a real one
 
Remove these adsRemove these ads by Signing Up

Step 1: The parts you will need

Picture of The parts you will need
You will need 3 orange connecters, 4 white pieces, 2 yellow pieces, 2 flexible orange pieces, 2 small wheel pieces, 3 purple connecters, 2 red pieces, 3 black connecter pieces, 8 blue circle pieces, 2 gray circle pieces, 2 small blue circle pieces, 2 yellow big to small pieces, 2 green long big to small connecter pieces, and 1 gray piece.

Step 2: 1st step on putting it together

Picture of 1st step on putting it together
IMG_4134.JPG
Put it together like this.

Step 3: 2nd step on putting it together

Picture of 2nd step on putting it together
IMG_4143.JPG
IMG_4149.JPG
Put it together like this.

Step 4: 3rd step o putting it together

Picture of 3rd step o putting it together
IMG_4154.JPG
IMG_4155.JPG
Put it together like this.

Step 5: 4th step on putting it together

Picture of 4th step on putting it together
Put it together like this.

Step 6: Finish

Picture of Finish
IMG_4089.JPG
IMG_4084.JPG
And then you are done with your Knex balisong. This balisong is meant to be held on the orange part of the handle. ENJOY!
Dguy42 (author) 2 years ago
Thanks
Great work!
Dguy42 (author) 2 years ago
If I get 5 followers I will post how to make a knex switchblade right when I get the followers.
this doesn't look like a very sturdy structure but besides from that not bad
Dguy42 (author) 2 years ago
Thanks, it was really hard for me to come up with this. I was constantly modifying it trying to see what i could do to make it better.
i like this it is neat