Instructables

How to make a Lego Candy Machine

Featured

Step 2: The "Floor" of the Candy Holder

Picture of The
DSC_0056.JPG
DSC_0057.JPG
DSC_0058.JPG
DSC_0059.JPG
DSC_0054.JPG
DSC_0046.JPG
DSC_0053.JPG
DSC_0048.JPG
DSC_0049.JPG
DSC_0050.JPG
DSC_0051.JPG
DSC_0047.JPG
DSC_0045.JPG
This step has 2 parts. 
First, you will need to make the "floor". This is to hold in the candy, but still leave an opening for the candy to fall through. You can see this in pictures 1-6. In picture 7 I showed how to attach it on the bottom.

Part 2 is the part that makes sure no candy gets let behind. It slants so the candy will fall toward the opening. I used slanted pieces stacked on top of each other to achieve this effect. You can see how I built it in pictures 8-13.


 
Remove these adsRemove these ads by Signing Up