How to make a Lego table out of PVC pipe

Step 3 Attach the Top

 After assembling the bottom we flipped it over on to the top piece and attached it.  I marked and drilled 4 holes on each side and 2 on each end.  We made a large 1/2" hole on the underside of the pipe and then a small whole on the inside of the pipe and board.  We then used 1 1/2" bolts and nuts and attached the top to the frame.  If you want to add trim I would suggest doing it before attaching it to the frame.  We used Lego's to hide the screw heads on the top of the table.

Comments

[starbricks]

did you change t-shirt?

[Cdn Sapper]

Wow that looks pretty pro!  Good job guys!