Print PDF
Favorite
Email
Step 4Assembling the Base
To assemble the base, first connect a tee to each end of the 6" piece of 3/4" PVC. Then connect an elbow to one end of each of the 7" pieces of 3/4" PVC. Use the 1.25" pieces of 3/4" PVC to connect the elbows to the tees. This is the front of the base.
Connect the 2.5" pieces of 3/4" PVC to each side of another tee, then put a tee on each of the 2.5" pieces. This is the back of the base.
Slide the 6" pieces of foam onto the 7" pieces of PVC, then connect the front to the back using the exposed ends of the 7" pieces.
Connect the 2.5" pieces of 3/4" PVC to each side of another tee, then put a tee on each of the 2.5" pieces. This is the back of the base.
Slide the 6" pieces of foam onto the 7" pieces of PVC, then connect the front to the back using the exposed ends of the 7" pieces.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
