Introduction: How to Make a Sweet Lego Propeller Car!

This instructable is going to teach you how to make a very cool looking lego car that has an attached propeller!

Step 1: Lego Parts Needed

These are the specific lego parts that you will be needing to make the propeller car:

-  1 lego person
-  4 tires
-  1 clear windshield
-  1 black propeller
-  2 black 4 dot pieces with connectors on each end
-  2 white 2 dot pieces
-  2 white 8 single line dot pieces
- 2 flat red 10 double line dot pieces
-  1 white 2 dot piece with attached connector
-  1 white steering wheel piece

Step 2: Step 1

Attach the 4 wheels to each of the black 4 dot connector pieces

Step 3: Step 2

Connect the 8 white single line pieces to the wheel pieces created in step 1, having each end connected next to a tire piece. Then connect each of the white 2 dot pieces in the space between the 8 dot pieces gap to form a rectangle.

Step 4: Step 3

Take the 2 red 10 dot double line pieces and attach them on top of the white rectangle making sure that 2 dots hang off of the backside.

Step 5: Step 4

Connect the propeller piece to the white 2 dot connector piece

Step 6: Step 5

Connect the clear windshield to the red 10 dot front side (side without hangover) in the middle. Then attach the steering wheel right behind it facing the backside.

Step 7: Step 6

Seat your lego man behind the steering wheel

Step 8: Step 7

Attach the propeller piece from step 4 to the backside of the car in the middle. Now your cool lego propeller car is finished! Thanks for reading my instructables!

Comments

author
chipper35 (author)2012-11-01

Do you know what makes this a PERFECT Instructable?? Its clean, simple and very concrete. Maybe the "item" is very simple, but the delivery of the "lesson" is EXCELLENT!!

About This Instructable

2,927views

4favorites

License:

More by Rmellang:How to make delicious cake balls!How to make a Sweet Lego Propeller Car!
Add instructable to: