How to make a pocket-sized bristlebot by mashedpotato13
IMG_0320.JPG
In this Instructable, I will show how to make my version of a bristlebot.
It is small, easy to make, and uses very little materials.

Pros:
-Very little materials
-easy to make
-Fun to play with

Cons:
-Tends to spin in circles
-You have to get the balance right
-uses a special type of toothbrush

***UPDATES!*** (as of July 20, 2009)

I found the perfect toothbrush head!
Use the Exact Cross-Bristle Toothbrush I found at Superstore and it will go straight!

I give most of my credit to http://www.evilmadscientist.com because I discovered his bristlebot after I published this Instructable.
MVI_0321.AVI(160x120) 755 KB
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

IMG_0322.JPG
Here are the materials you need:
-1x vibrating pager motor
-1x toothbrush head (bristles have to be angled as shown in picture 2)
-1x cell battery (any type, has to be between 1-9 volts)
-a piece of foam tape (already attached to top of toothbrush head)
srinagrao says: Jul 5, 2012. 8:44 AM
hey can u send me a link to buy tht pager motor?
mashedpotato13 (author) says: Jul 5, 2012. 5:36 PM
I took apart an old pager...
kwilt says: Mar 16, 2010. 8:25 PM
I am desperate to find a good toothbrush to use!! I have been making them with kids and they don't work right with the average bristles.  I have been searching on the internet for the toothbrush that you recommend, but I can't find it at all! Is 'Exact' the brand?  And what is Superstore?  IF you can help me I will be eternally grateful!! Thanks so much for a great Instructable!
mashedpotato13 (author) says: Mar 27, 2010. 3:08 PM
Do you live in US, because I found this toothbrush in Superstore in Canada. Nevertheless, find a toothbrush with bristles that criss-cross with each other.
tan123 says: Jan 9, 2012. 7:10 PM
You can make ordinary bristles work, all you have to do is bend them back to make the bot go forward.This also works with turning, bend the front bristles left to go right and right to go left, for added speed trim the bristles a tiny bit on a slope with the front ones a little shorter than the back ones.
jason the redneck guy says: Jan 15, 2011. 4:27 PM
What is the Exact Cross Bristle and What is Superstore?
sallygold33 says: Jul 27, 2010. 12:20 PM
haha that's awesome.Does anyone know if I can make a bristlebot with my toothbrush? (it's a malibu bright brush, it already has a motor so I'm pretty sure that's all I need, right?)
H20 says: Sep 6, 2009. 6:58 PM
I took apart a cell phone but no motor. What cell phones work?
rickharris says: Jul 26, 2010. 12:35 AM
Most cell phones vibrate but some have a round vibrator like a small coin rather than a regular motor and weight. It will still work though.
cmait4 says: Sep 27, 2009. 9:58 PM
ones that vibrate when you get a phone call
rickharris says: Jul 10, 2009. 9:19 AM
And how is your version different from the original which you don't credit?
rickharris says: Jul 26, 2010. 12:32 AM
Thanks for including the credit and all credit to you for the re-invention. :-)
danielemur says: Apr 10, 2010. 9:19 AM
there are a lot of different instructables out there about bristlebots and it would be challenging to reference them all. he just might not have seen the original.
tom_taylor1993 says: Jul 10, 2009. 11:23 AM
(removed by author or community request)
mashedpotato13 (author) says: Jul 11, 2009. 8:57 AM
i never knew that www.evilmadscientist.com also did it
rickharris says: Jul 11, 2009. 1:43 PM
Really!
Redgerr says: Jul 15, 2009. 11:43 AM
its still cool though-- i like how he used a toothbrush head O_o
Cubie2 says: Jul 25, 2010. 4:43 PM
Rick Harris- this robot has been around LONG before 'Ibles and to credit the first maker would be virtually impossible. Seriously! Are you the official you-didn't- make-it-first-so-you-suck person on instructables? stop with your sarcasm and think- did kill1234 REALLY offend the world by not crediting the original builder? Is the original builder going to care enough that the entire world's going to explode because he wasn't credited? (This is assuming the Original builder isn't already DEAD.) I'm sure if kill1234 knew who built it first he would have said. Seriously... oh yeah- thankyouandhavaniceday. -AdmiralCubie
Kiteman says: Jul 31, 2010. 1:22 PM
There was, apparently, a bit of a barny about whether EMS invented the bristlebot.

However, this is one of those devices that has been invented independently several times in history. William Gurstel has one in one of his books, I've seen a Japanese concept car that used the idea (decades ago), and my own boys have raced electric toothbrushes across the shower tray.
rickharris says: Jul 26, 2010. 12:34 AM
http://www.evilmadscientist.com/article.php/bristlebot

Thanks for your comment.

H20 says: Feb 7, 2010. 6:43 AM
where is the motor?
awadell says: Oct 16, 2009. 1:24 PM
Goggle "pager motor" you can buy them online for about a buck
cmait4 says: Sep 27, 2009. 9:56 PM
I made two of these last year. one of the motors burned out and stopped working but the other one still works to this day.
rada194 says: Jul 28, 2009. 6:39 PM
Those vibrating motors are also in some electric toothbrushes
xadevox says: Jul 20, 2009. 3:11 PM
yea but I don't know where to get the pager to dissasemble!
xadevox says: Jul 19, 2009. 3:59 PM
where can i get a cheap vibrating pager?
mashedpotato13 (author) says: Jul 20, 2009. 2:27 PM
you can either disassemble a pager or buy it from ebay.
Kryptonite says: Jul 13, 2009. 12:37 AM
I like it. Simple, yet fun.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!