Print PDF
Favorite
Email
Step 15Lay up and cure of the remaining carbon layers
The final layers are applied and are bagged and cured as described previously.
The total amount of basic layers is 7 (including the first 3). At the end piece there are 3 additional layers and at the boom head 6 additional layers, starting at the beginning of the bend and gradually building up to the boom head. The orientation of the layers is 0-90. Only at the end piece there is one layer at +/- 45 to counter shear forces. A cured layer is 0.3 mm thick with a fiber volume fraction of 50%.
The total amount of basic layers is 7 (including the first 3). At the end piece there are 3 additional layers and at the boom head 6 additional layers, starting at the beginning of the bend and gradually building up to the boom head. The orientation of the layers is 0-90. Only at the end piece there is one layer at +/- 45 to counter shear forces. A cured layer is 0.3 mm thick with a fiber volume fraction of 50%.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
