Print PDF
Favorite
Email
Step 7Form, pressurize & cure
Force the sealed tube between the nails to give the glass pre-form its shape. When the tube is fixed, apply pressure to the innner tube.
Now the glass pre-preg (which, if you were fast enough, is still not cured), is forced to the inside of the outer tube and will remain in this shape once the resin is cured.
Use something sharp to puncture the tape wrap here and there to allow excess resin to squeeze out.
Now let the epoxy resin cure overnight.
Now the glass pre-preg (which, if you were fast enough, is still not cured), is forced to the inside of the outer tube and will remain in this shape once the resin is cured.
Use something sharp to puncture the tape wrap here and there to allow excess resin to squeeze out.
Now let the epoxy resin cure overnight.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
