With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Today my family cleaned out our basement and found some old cardboard boxes. My family was going to throw them away, but I decided to use for somethi...
1. Computer 2. Cardboard box with slightly larger dimensions than your computer's mother board. 3. Duct tape 4. Scissors or knife 5. Lots of time 6. T...
Place your motherboard into a box and install all the ram, graphics cards, and hard drives. Cut out areas for the plugs and ports. I encased the har...
I just figured out that my hard drive was overheating, causing my computer to restart randomly. Make sure you keep your hard drive in an open place. ...
Cut holes in the box to add a second box on top. I cut two holes for fans, one for the processor's and one for another.
Add drives and PSU on top in a way that fits together, kind of like a puzzle.
I added a layer of duct tape on the front to help hold it together.
Put a final layer of cardboard on top of the box to seal it off. I purposely made my final layer in a funky design
Push the power button (which you should have incorporated into your design already) and see if your computer works. If so, good job, you just built a...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »