Print PDF
Favorite
Email
Step 4Make the Base
You're going to need the weird unnamable tool, the CD-Spindle foam, electrical tape, and the knife.
Cut a 1/2 inch by 2 inch by 1/2 inch rectangle of foam (you can estimate to wahtever you want). Place it centered on the bottom of the U of the wierd tool. Tape it in place with the electrical tape nice and tight so that it doesn't shift.
Cut a 1/2 inch by 2 inch by 1/2 inch rectangle of foam (you can estimate to wahtever you want). Place it centered on the bottom of the U of the wierd tool. Tape it in place with the electrical tape nice and tight so that it doesn't shift.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
