Step 3: battery

on the left side of the camera is a battery. when this battery dies, then the flash dies, so change the battery, and now you can
i lol'd at how generic that battery was XD
&quot;Battery&quot; <br><br>Oh . . . Thank you, battery.
They say ALKALINE on the covered side. I've seen quite a few of these.
New and improved: Battery Battery!
This doesn't work with any disposable camera I've ever seen. The one in the pictures is no exception.<br>To load film into a disposable camera, you must pull the entire roll out of the canister and wind it around a spool on the left. So before you've even started taking pictures, you've exposed the entire roll of film. <br>The reason disposables are built like this is so each time you wind on after taking a shot, the film is pulled back into the carrier, rather than out of it, like with regular cameras. That way, they can be pulled open and the film is ready to be developed. Also, it's cheaper to manufacture as the camera doesn't need to have any kind of winding mechanism to pull the film back into the carrier.<br>
^^^I was kinda thinking the same thing<br />
after you use a couple to learn to open them w/o <em><strong>destroying </strong></em> the casing you can use the parts for other projects ;)<br/>
I built this out of a used disposable camera and it works great.(No film though)
I didn't get the impression that the idea was to take infinite PICTURES, but just to get a device that you can use as an easily triggerable <strong>FLASH</strong> toy/tool/weapon, after the picture taking is done. It's something I've considered doing myself... This would work fine for that sort of purpose.<br/>
Yeah,that's what I use mine for.I got 13 used cameras from Walmart and made this with them just for uh,I really don't know.
Yeah, that's the only practical use I could see for this myself. The hole would spoil any film, but it would be a good idea if you we're using it as say a Rail Gun or something. :P
isn't this letting light int the camera and exposing the film before u even take a picture?
It won't work. By ripping off that chunk of the back cover, you've opened a hole into what used to be a light-tight environment. That little gear there is where you load the film-the holes in the edge of the film line up with the sprocket teeth. Any film you put in there will be ruined. Also, some (at least the one that I opened up today) disposable cameras actually wind the film backwards-all of the film is out of the canister and wrapped around the spindle at the factory, so that when you take pictures, the film rewinds back into the canister. The only way to load a camera that does this is to pull all of the film out in a perfectly dark room, wrap it around the spindle, and reassemble the camera.
What CameronSS said, plus... It is also possible to buy light-tight bags (sort of a small black sack with two sleeve-holes) - they're a lot cheaper than a full dark-room, but you have to do everything by touch.
Don't you have to do it by touch in a full darkroom?
You can put the camera inside a few rubbish bags (preferably empty rubbish bags XD ) That works, we did it at school when the darkroom was under construction :-)
Yes, and also in one of the bags.
Forgot about those, I have access to a darkroom at school.<br/><br/><sub>two, actually</sub><br/>
Well the loading bit, for backwards ones you could start the spool, then just turn the spool to get it loaded up, it might work but you'd probably need to make something to let you turn the spool...
i added your instructable to the disposible camera guide <a rel="nofollow" href="http://www.instructables.com/id/Disposable_Cameras/">http://www.instructables.com/id/Disposable_Cameras/</a><br/>
I admire the spirit of this Instructable. Keep it up! This is a constructive comment, so don't freak out. :) For all the trouble, and considering the cost of a disposable, isn't it worth the $20 or less to purchase a reusable 35mm film-using camera?

About This Instructable


12 favorites


More by zygote90: How to make a disposable camera infinite
Add instructable to: