Print PDF
Favorite
Email
Step 6Glue and clamp the interior hoop to the project
Once the craft is dry, you will need to glue the interior hoop to the project.
The best way to get a firm hold is to put the glue on the inside of the exterior hoop, put the interior hoop over the tulle and ribbons, then clamp it all into place.
Leave to dry.
The best way to get a firm hold is to put the glue on the inside of the exterior hoop, put the interior hoop over the tulle and ribbons, then clamp it all into place.
Leave to dry.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
