Introduction: Simple Belt Hanger

I while back I came up with a very simple way of hanging a belt. I recently had to make a new one, so I thought I would document and share the process. Enjoy.

Step 1: Items Required

You will need the following items:

-Small flat head screwdriver
-Split ring
-Picture hook
-Nail

Step 2: Insert the Picture Hook

Take your small flat head screwdriver and insert it into the split ring. Twist the screwdriver to widen the opening in the split ring. Insert the picture hook into the opening created by the screwdriver. Remove the screwdriver from the split ring.

Step 3: Admire Your Handiwork

You are now done. Mount it on the wall and hang your belt from it. Grab a nice cold drink, sit back, and admire the beautiful work you have just done.

Comments

author
christopher122015 (author)2015-05-04

We went in search of the very best belt hanger cash could buy.

author
pickles55 (author)2010-12-09

In stead of gluing the ring on, you could bend the hanger into a loop to hold the ring. I've always had trouble gluing metal parts this way.

author
Doric (author)pickles552010-12-20

Actually, reading this comment has inspired to to go ahead and try again to repost the new method, and this time I was successful!

author
Doric (author)pickles552010-12-20

You make a valid point. I actually have a revised version of this, which does not involve any glue. However I have not posted it due to frustration with uploading the pictures.

author
goldenbacon (author)2009-12-25

Totally Photo-shopped.

author
craig3 (author)goldenbacon2009-12-26

where?

About This Instructable

3,347views

2favorites

License:

More by Doric:Simple Belt Hanger
Add instructable to: