Print PDF
Favorite
Email
Step 5Finished!!!!!!
Now you have finished your laser!
If you need more help this guide is great too! http://www.laserpointerforums.com/forums/YaBB.pl?num=1213338268/0#0
This will last WAY longer then kipkays lasers cause his DON'T use drivers or heatsinks making them die VERY quickly.
Hope you enjoy your laser!
(I did not design this laser or make any of the parts I linked to I only made this guide.)
If you need more help this guide is great too! http://www.laserpointerforums.com/forums/YaBB.pl?num=1213338268/0#0
This will last WAY longer then kipkays lasers cause his DON'T use drivers or heatsinks making them die VERY quickly.
Hope you enjoy your laser!
(I did not design this laser or make any of the parts I linked to I only made this guide.)
| « Previous Step | Download PDFView All Steps | Next Step » |
3
comments
|
Add Comment
|
Oct 20, 2009. 1:23 PMtanis9319
says:
very complex not easy to get parts this is not cheap you lied and you will regret it eventally
Reply
Mar 22, 2011. 5:11 PMaj0my0lizard
says:
YOU STOLE MY AVATAR!!
Reply
Sep 2, 2010. 3:33 PMCyborgGold
says:
A comparable laser if purchased from a manufacturer would cost around $250 or more.... so yes, it really is cheap. You could cut some cost by not adding the heat sink but doing that would make it burn out a lot faster. It is also not that complex as far as electronics are concerned.
Reply
Oct 30, 2009. 7:31 AMnitewing117
says:
This is pretty straight forward. Thanks for the info.
Reply
 |
Add Comment
|
