Step 9: Enjoy

This lamp can be placed on its end or its side. You could even hang it from the cord.

If you want to try this out, grab the .eps files from my showroom on Ponoko. You can grab the lamp with the flower design as you see below or you can grab the lamp without anything engraved on it. Do let me know what you think.
<p><a href="http://www.g4ledonline.com/g4-led-bulb-disc/G4-5050-led-15smd-Led-12V-G4-Led-Marine-Lights-G4-Led-Lamp-DC10-30V-Warm-white.html" rel="nofollow">http://www.g4ledonline.com/g4-led-bulb-disc/G4-5050-led-15smd-Led-12V-G4-Led-Marine-Lights-G4-Led-Lamp-DC10-30V-Warm-white.html</a></p>
Love the design and the fact your included the cdr files. I made some slight changes to your design, hope you don't mind: <br> <br>Instead of the corded lamp i used an LED and 2 AAA batteries, i hot glued the battery holder to the inside of the lamp <br> <br>http://i50.tinypic.com/j5bj80.jpg <br> <br>I soldered a mercury switch in the ground of the LED <br> <br>http://i45.tinypic.com/30ju0bn.jpg <br> <br>but why you ask? simple so I don't mess with the design on the lids (I also made the lid holes 1/2 mm smaller than the plexy allowing me to get rid of the holding tabs) <br> <br>http://i50.tinypic.com/211ksg.jpg <br> <br>ok that's all fine and dandy but how do you turn it off? simple the mercury switch only works when it's oriented in a certain angle, the way i glued it the switch will close the circuit when the lamp is right side up when you turn it upside down the LED turns off <br> <br>ON: <br>http://i46.tinypic.com/213rxl.jpg <br> <br>OFF: <br>http://i49.tinypic.com/15cbzn7.jpg <br> <br>and there you have it a night light. <br> <br>again thanks for the design
Great modifications! Thanks for sharing! <br>
it is really very good
Im so excited to see this. Im glad..<br>
that looks cool, I would like to know what the sizes are.
hi, i like to know how you specify ponoko the size of the piezes, thanks a lot
Hi. Ponoko currently has 3 sizes of material you can fit your designs onto. P1 (181x181mm or 7.1x7.1inches), P2 (384mmx384mm or 15.1x15.1inches) and a P3 (790x384mm or 31.1x15.1inches). You select what size material you want when you are uploading an eps file and choosing the material to make the design out of.
how much does something like that cost from Ponoko? Most of the things for sale on there look incredibly pricey for what they are.
You can see the price breakdown if you scroll down the comments a bit. Cheers
Great design! Perhaps I missed it somewhere but you might consider including specific information about material thickness and sheet size for those who are still on the learning curve. :)
The acrylic is Arctic Ice 4.5mm thick and will fit onto a 384x384mm (a P2 template) size piece of material. The Hardboard is 4.75mm thick and would fit on the same sheet size. Thanks
I realize that there are many CAD programs available, but, please, which package are you using?
I have used Solidworks. Someone told us recently that Sketchup can output an eps, but it seems to be only the Pro version.
nice laptop! i wish i had a laser cutter so i could make anything -gamer
The point of the article is that you don't need a laser cutter. Ponoko will do the setup and cutting and send you the end result. All you need is the software to create the EPS files. BTW danemery, that's a slick way to hold the lamp together.
About how much does this cost? I remember reading about this in the NY Times and verified that stuff does indeed ship out of New Zealand.. so while a test file was <$20 to cut, it was over $60 to ship! Is there an easier way to find a friendly laser cutter?
Shipping is the biggest issue our users are letting us know about so we're working hard to make this less of a problem. We do have to ship out of NZ and this does make it more expensive - however it does arrive to most destination within 5-7 days. Solving this problem really requires us to have a point of presence close to where you are. We're working to open a North American bureau first and then to expand from there. We hope to get this online as soon as we possibly can because we'd really like to get people making and know the shipping can turn people off. I'm looking forward to that day very much! :)
I have a laser cutter. How do I make a lamp? I'm confused. I think you should re-title this Instructable. It is misleading.
You can download the files <a rel="nofollow" href="http://www.ponoko.com/showroom/madebydan/401">here</a> and then make the lamp on your own laser cutter. Ponoko can allow people to make things if they don't have their own laser cutter.<br/>
Pricing for this lamp (with flowers engraving) works out like this.<br/><strong>Hardboard - Standard</strong><br/>Cutting cost: $6.08<br/>Material cost: $7.14<br/><strong>Acrylic - Arctic Ice</strong> <br/>Cutting cost: $14.24<br/>Material cost: $17.83<br/>
How much did Ponoko charge you?
Thanks for the comments. I'm glad you like it.
cool :-)
Even though you are using a specific commercial entity, nice explanation and discussion of techniques and the design process.

About This Instructable


211 favorites


More by danemery: How to create laser-cut jewelry for under $4, using free software How to make a personalized jigsaw puzzle How to make laser-cut jewelry for Valentine's Day
Add instructable to: