How to make a lightbox

Step 3 Adding the Artwork to cardboard

This is where I introduce an added element to my lightbox. I used an artwork and make it as a wallpaper for the box. Cut the outline of your artwork and make sure its pasted around the center of the back of the board. You can choose to paste it after you have marked the grid of the cardboard or after.

Next, I followed Drips design of the lightbox which looks like a staircase. I followed every measurement and cut accordingly using a pen knife. Please take note that you should paste the artwork before you cut according to the grid so you don't have to cut it 2 times and it will look neat.