My co worker needed a last minute Halloween costume so after taking an inventory of useful items I helped him make this costume the night before Halloween- we did it in my freezing cold garage in about four hours.
It was so cold the glue would instantly solidify when it came out of the hot glue gun.....
Step 1: Materials
For the clothing you'll need some dark brown pants, a blue jacket (or blue vest- this can also be made from a blue shirt- the miltary BDU style works best), a white pull over shirt and some yellow felt. We used some old combat boots because that's what he had but some cheap rubber rainboots would work just as well.
For the blaster you'll need a couple of funnels, a few wood dowels, some 1/8" hardboard, a small diameter tube (brass or whatever), a small PVCconnector and a 1x6 wood board as well as a can of black spray paint and some glue- epoxy is best.
For the gun belt you'll need some thin aluminum sheet, some 1/8" hardboard, some rivet style snaps and some brown vinyl.
You'll also need a hot glue gun, a rivet gun and a few wood screws.
Step 2: Clothing
All that really needs to be done here is to cut a small vertical slit in the white shirt (unless it already has one) and cut the yellow felt into small rectangles and glue them onto the sides of the pant legs with ta hot glue gun. Clothing done!