Introduction: Mini Crossbow (Pocket Crossbow)
This is my crossbow. Its made out of Popsicle sticks, a metal rake tine, 2 paper clips, and a wire or strong string.
Step 1:
Get 3 Popsicle sticks and cut the ends off and glue them to full sticks on the ends.
Step 2:
Make a cut near the front and then lay a toothpick out on top as shown in picture and mark it and make a shallower cut than the first cut then make slanted cut with exacto knife on smaller cut.
Step 3:
Cut a Popsicle stick with no ends in a quarter and cut in on a angle and drill a hole close to top and drill hole in stock on crossbow as shown in picture.
Step 4:
Get a paper clip and bend it into a 90 degree angle and cut as shown in pic. insert trigger and push wire through and bend close.
Step 5:
get a rake tine and drill a hole in the tine on both ends and and get a piece of paracord and take a little strand on it and tie on both ends.
Step 6:
Attach bow to stock.
Step 7:
Bend paperclip into U shape and wrap it in tape and then hot glue it onto crossbow and its done. This was my first instructible so tell me how i did,thanks.