Print PDF
Favorite
Email
Step 16Changing colors and line weights
With the light grey roads selected, open the Fill and Stroke box again.
I wanted to put a light vector around the perimeter to add some crispness to the engraving. Set the stroke color to green (R:0 G:255 B:0 A:255) and the width to 0.003mm.
I also did the same to the water areas and the park areas. For the main road I used a red (R:255 G:0 B:0 A:255) line to give it a heavier vector engraving.
I wanted to put a light vector around the perimeter to add some crispness to the engraving. Set the stroke color to green (R:0 G:255 B:0 A:255) and the width to 0.003mm.
I also did the same to the water areas and the park areas. For the main road I used a red (R:255 G:0 B:0 A:255) line to give it a heavier vector engraving.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
