Print PDF
Favorite
Email
Step 5Add padding.
After you've done that, start wrapping tape around the bottle cap, so that it sticks out. ALOT!
Then cut the bit that sticks out every 5mm or so, and push all the "teeth down"
Then completely cover it with more tape, making sure its as even as possible.
Then cut the bit that sticks out every 5mm or so, and push all the "teeth down"
Then completely cover it with more tape, making sure its as even as possible.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
