Instructables
In this indestructable i will demonstrate how to make a cute "critter" plushie from the classic arcade game Doukutsu (by pixel studios)

Step 1: Step 1 (Fabric)

You need to get some fabric, preferably something soft
the easyest way to get this is to cut apart old t-shirts
the amount of fabric you need will be detirmined by the size of your plushie
also you will need some stuffing

Step 3: Design

Now you need a design for your plushie
I got mine off the Doukutsu Tribute site Doukutsu Tribute site

Step 4: Transfer and cut

Transfer your design to the fabric (i.e. trace it, etc.). Make sure you have the corect number of peces for your design (on mine: front, back, and two ears). then use the rotery cutter and scissors to cut your design out (make sure you leave a 1/4-5/8 inch seam alowance)

Step 6: Sew

This step is pritty simple, you just sew along the outline
(it might help to go to this sewing site-it will show you the basic stiches) be sure to leave a small hole for stuffing

Step 7: Stuffing

pack the stuffing into the hole you left (do not overfill) till it is full but still soft

Step 8: Finishing

sew up the hole you put the stuffing in (try using a blind stitch) put anything else on now (e.g. eyes, ears, glue on noses, etc) *notice I missed and you can see the black thread on the left ear, dang*

Step 9: Enjoy your plushie!

and please note that any small objects are not for small chilrdren or the mentaly impared

Pic2: another (more complex) plushie of a char named Balrog in the same game

"Huzzah!"
 
Remove these adsRemove these ads by Signing Up