This version is a very smooth one. It goes through the belt loops very easly if you tighten the paracord a lot. This belt unravels to about 50 feet of paracord. You could easily weave this into a hammock if you wanted too.
There is not many steps because I crammed all of the braiding instructions on one step.
Remove these ads by
Signing UpStep 1:
-(two) 50 feet of paracord (two different colors)
-(two) D-rings
-Webbing (Check the picture notes)








































Visit Our Store »
Go Pro Today »




I also like it because I have 88' of uncut single color of cord, and I still have a belt. It looks nice and it does feed thru the loops easily as descriped. I found this method to roughly equal 2' of cord per 1" of braid.
Very nicely done! My next belt will be two colors!
Your project gives form to what I was envisioning...
I am planning to do the same but to wrap my bicycle's top tube.
The idea is to change just a little of your project to achieve this:
Instead of using two cords, I'll just use one that would fold in two!
This way, when required, I could unweave it all and have a single cord!
Instead of using the webbing, obviously, I'll be using the bicycle's top tube...
I'll try to publish my finished project when done.
Thank you, again!
Good pictures, keep posting!
Thanks! Please vote and give it a good review! Tell this to your friends!