Introduction: How to Make a Robot That Can Play Tower of Hanoi

Picture of How to Make a Robot That Can Play Tower of Hanoi

On September, I have built a robot that can play Tower of Hanoi by Makeblock. And we took it to the World Maker Faire New York 2013.

For more information, you can visit here.

Getting Started
Recently I have rebuilt a new one. This instructable, How to make a robot that can play Tower of Hanoi, will show you the step-by-step instructions of the new Tower of Hanoi Robot.
Now let's have some fun!

Step 1: Materials List

Picture of Materials List

Step 2: Tools

Picture of Tools

1.5mm Hexagonal Screwdriver
3mm Hexagonal Screwdriver
Cross Screwdriver
Slotted Screwdriver
Nylon CableTies

Step 3: Build the Pedestal of the Robot

Picture of Build the Pedestal of the Robot

Step 4:

Picture of

Step 5:

Picture of

Step 6:

Picture of

Step 7:

Picture of

Step 8:

Picture of

Step 9:

Picture of

Step 10:

Picture of

Step 11:

Picture of

Step 12:

Picture of

Step 13:

Picture of


albertsaniza (author)2014-05-06

where can I find the suction system?

bbmerong (author)2014-03-30

How can I get this vaccum pump and nozzle like the upper case?

Please let me know this info. Thank you in advance.

G4Bionicle (author)2013-11-13

What beams did you use for your project?

Hi, It's made of Makeblock.

dkoss (author)2013-11-13

Is it just me or does this look suspiciously like assembly instructions by Makeblocks?

About This Instructable




Bio: Makeblock was founded in 2012 as the world's first open-source robot and programing platform. With more than 400 mechanical components, electronic modules, and software ... More »
More by Makeblock Robotics:How to Use Scratch or Arduino to Program a MBot 3D Capture B by Makeblock How to do a cartoon project with Airblock and paper cups
Add instructable to: