Print PDF
Favorite
Email
Step 8Puting the wires together
"Just follow the instructions that comes with the board (the AXE023)"(i cant put it in words but the instructions to the board (AXE023)can) - it cannot be more simple, hook up the 2 motors.
The motors I recomend are incredible! Fast and strong, even though I only feed them 3.5V due to the 1.5V drop from the Motor Driver. So I actually had to make a "tale-bumper" (red square) as it was lifting the front a little too much :D With the bumper on it turned out quite cool, as it is just as capable of navigating on only the rear-wheels.. there is nothing else but a glider in front anyway.
The motors I recomend are incredible! Fast and strong, even though I only feed them 3.5V due to the 1.5V drop from the Motor Driver. So I actually had to make a "tale-bumper" (red square) as it was lifting the front a little too much :D With the bumper on it turned out quite cool, as it is just as capable of navigating on only the rear-wheels.. there is nothing else but a glider in front anyway.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
