Introduction: How to Make a Seed Starter From a Paper Roll

Step 1: Measure Your Roll

Step 2: Mark Your Roll With a Pen

Step 3: Flatten Your Roll and Draw a Straight Line Across the Roll

Step 4: Cut Down the Line

Step 5: Cut 1/2 Inch Around the Bottom of the Roll Use the Creases As a Guide

Step 6: Fold the Flips Over Onto One Another

Step 7: Make Sure It Is a Tight Fit

Step 8: Place a Piece of Tape to Hold the Botton of the Seed Pack.

Step 9: Fill With Good Potting Soil and Plant Your Seed.

Step 10: Plant Anywhere in Pots Ground a Good Start for a Seed Make for a Healthy Plant.