How to Make a Simple Throwing Dart

The most easy way to make a throwing dart.

Step 1: Step 1

MATERIALS
one paper clip
one needle(or more)
black electrical tape

Step 2: Step 2

Start unfolding the paper clip and be careful to keep it straight as possible so its more accurate.

Step 3: Step 3

Make sure when your done bending that it is straight, its okay if its a little off.

Step 4: Step 4

Take the needle and put it on the paper clips end and then start taping, just don't tape it to much or else it will be to heavy.

Step 5: Step 5

Tape the bottom and use the same thickness of tape like you did on top so it will be a counter weight.

Step 6: Step 6

Hold it the same way as shown on the picture. Then just throw it.

Step 7: Step 7

This is what you will get if you did every thing righ. Enjoy!!!!