Instructables
Picture of How to make a toggling bed
I needed a bed I can toggle to open the door of the balcony.
 
Remove these adsRemove these ads by Signing Up

Step 1:

Picture of

Step 2:

Picture of

Step 3:

Picture of
DSCF0005.JPG
the rotation is manual, and it's made by a 6mm metal screw.

Step 4:

Picture of

Step 5:

Picture of
DSCF0008.JPG

Step 6:

Picture of

Step 7:

Picture of
DSCF0015.JPG

Step 8:

Picture of
DSCF0019.JPG

Step 9:

Picture of
you can see the real result.
for the one likes virtual result, you can open the google.SketchUp file with the real measures.
enjoy

PS: don't forget the 5th leg as it is shown in GoogleSketchUp file, if you miss it, the bed can toggle
when you're moving on the wrong part!
bed.skp122 KB
kmullins41 year ago
this is really fantastic, my question is this
could this work on a double bed? would it be strong enough?
i tried downloading google sketch, first some other dumb program tried to eat my internet and then i could not work out how to use it. which is sad. so just a simple yes no answer will do me! :)
flavien008 (author)  kmullins41 year ago
I don't, but this project worked beceause the length is much greater than the width.
if it's squared I don't think it can work well (two persons can move more than one in a bed, so I don't think it can be strong enough).
I don't know for the Google Scketch Up problem (it's a long time ago).
Aliali3221 year ago
this is awesome!!
acurto1 year ago
For some reason I can't reply to my own comment so I'll just make a new one: I looked at the google sketch file, like I said, but it didn't say what materials were needed or what directions or follow or anything like that.
acurto1 year ago
Am I missing something here because it looks like there's just pictures but no actual instructions on how to make this... for example, I don't see anything about what supplies are needed or measurements or anything. I even found googlesketchup and opened the file but it still doesn't say like what screws or bolts and what have you to use. I'd love to make this and it looks pretty easy, can someone please help?
flavien008 (author)  acurto1 year ago
There is a googleSketchUp file to download, where everything is on scale.
so in the free software you can tae the ruler and measure anything you want.
Eye Poker2 years ago
I would have added a hole in the frame and a hole in the supporting strut on each side that you could slip a both through to prevent it from falling unexpectedly.
flavien008 (author)  Eye Poker2 years ago
on the google scketch up file, you can see I added a fifth leg to prevent it (if I understood right what you wrote)
EmmettO2 years ago
Did you do anything to secure the mattress to the bed?

I've been wanting to build a murphy bed for a while and with some hefty springs on the side of the bed near the wall, this could be a good start for the design. Cool!
flavien008 (author)  EmmettO2 years ago
yes, there is the piece of wood to prevent the matress to slide to the ground (you can see the piece of wood close the wall on the picture), and there is two rope to attach the matress to the bed.
How do you use the ropes to attach the mattress to the bed?
flavien008 (author)  SandLizard2 years ago
there are two ropes, as they are belts, one on the position of the pillow, and the other on the position of the ankles.
Thank you.
middleton2 years ago
This is the coolest ever, and could be potentially free in parts!
Totally. Scrounge wood from discarded pallets, handful of nails, a couple of screws, freecycle a mattress and some rope - voila!
iongets2 years ago
Now , could someone please design one with aluminum , so it can go into a homemade camper, ( keep it light as possible for gas savings ) THANKS !!
Don't have a design, but I'd think a simple rectangular frame with a weave (like a lawn chair) to hold the mattress. Bolted to the wall with hinges so it flips up (or down if that's what you need) and is secured horizontal by straps connected to eyebolts (anchored very well) or you could skip all that and just put up a hammock.
Txjoe2 years ago
Great bed, thanks for sharing, at this time. I have to build added sleeping places, for company and you have given me the answer.
patmac2 years ago
This is great for guests if space is tight. With added cushions it could be used as seating as well. Great idea and very creative.
TigerMoon2 years ago
This is just what I need for the tiny studio I plan on moving into, thanks!
urtlesquirt2 years ago
Very useful idea for heavy sleepers. Wire it to a timer so if you don't get up and turn it off, it will dump you after 30 seconds.
flavien008 (author)  urtlesquirt2 years ago
It happened to me one time, cause I forgot to set the 5th leg!
I fell on the ground between the bed and the wall.

Yours seems to be more a trap than a bed! have fun!
bo52 years ago
Thank you for the sketchup :D
oddartist2 years ago
Well done! What a space saver!