How to make an arrow for under $10

Step 4: Finishing the arrow off

To finish the arrow off, fist of all cut a notch on the end of the arrow that is going vertically with one feather going at three o'clock to it.

To make a point at the end you could just sharpen it off with your stanleyd knife or buy an arrow head from an archery store.

The finished product should look like this(The arrow head is not included in this instructable) :

Comments

[skimmo]

i was thinking this morning could you make arrow tip by cutting a bullet sell in half and leave to projectile in the end then gluing the whole thing onto the end to make a field tip

[airsoftjunke]

wouldent the dart destableize the arrow in flight

[yakub123]

how does the dart stay on .. another good way of making a arrow head is by getting the metal tip of a pen puting a needle through the hole and fixing it together and gluing it to the arrow. when gluing to arrow use lots of super glue .

[14968870]

a much easier way to make fletchings or feathers is to take two pieces of tape ( they should be wide like duct tape) and put them on opposite sides, then seal the two sticky parts together(try not to trap any air bubbles) then trim them to the size and shape you want

[Bright Shadow]

yea, but it looks like slop