Picture of How to make an Ice pick
If you do not have an ice pick to pick ice than you can make one. It is really easy and takes no time at all.
Remove these adsRemove these ads by Signing Up

Step 1: Get the stuff

Picture of Get the stuff
All you need is love (no not really)
you need:

A phillips screwdriver.

And a dremel tool with a griding wheel.

Be sure to wear safety glasses!

Step 2: Start griding

Picture of Start griding
its really simple all you need to do is start griding the tip to sharpen it. In the picture the tip is not done yet. Make sure to wear safety glasses, there will be flying metal bits and sparks.

Step 3: Keep griding

Picture of Keep griding
keep griding it. Sharpening it more and more. In the picture its still not done.

Step 4: Done!

Picture of Done!
Thats basicly how you make it, mine could be sharpend more. Now go and pick some ice, and Please wear safety glasses.
sciman14 years ago
one tiny piece of advice...
after you grind that much you
should have included how to re-harden the steel.

he would only have to re-harden if he applied the grinder long enough to overheat the metal.
mg0930mg6 years ago
Looks like it could be grinded down more.
Nice, you may want to go back, and change the spelling. Griding should be grinding. It is nice I will try this. You could have kept it as an awl, and said what that was for.
mycroftxxx6 years ago
Nicely done, simple instructable. Good work!