With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a fun thing to play tricks on friends with or to play airsoft with! I am pretty much a sneaky person with a airsoft gun and a ghillie suit and...
To start this project, you will need to get some pretty basic things. Heres what you need: Cottonelle toilet tissue box A small mousetrap Four 6-inch ...
Start by poking four holes on the side where the hinges are for the nails. Put them in pairs on each side as shown in the picture. Next, cut a rectang...
Take your kebob skewer or pencil and tie a pretty good length of fishing line onto it. Take the rubberband and wrap it around the knot so the fishing ...
This is the size of mousetrap you need. Drill a hole on each side on the part where the pin is. Then take your zip tie/cable tie and stick it through...
Drill a hole kind of in the top middle of the top of the box. Take your pencil or skewer with the fishing line on it and thread it through this hole t...
Easiest step. Take scissors and cut one long side about the width of a quarter and tape it so it doesnt fall apart. Done. This box is for the bbs.
Cut a slit in the middle of each long side on the tiny box you just made. Glue the tiny box on the hammer part of the mousetrap to where the slits are...
To test out your claymore, first you need to jab it into the ground. Then unroll the length of the fishing line and make sure it is tight, not too tig...
Spraypaint the outer shell of your claymore the colour of your choice depending on your enviroment. Make sure the paint is Extra-Flat, Flat, or Satin....
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »