With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I've been spending a lot of time in the shop recently and it can get very loud; since I want to preserve my eardrums, hearing protection is important....
First things first: pull the foam out of the hearing protection. That was easy! Next, disassemble the headphones. Mine had small phillips screws hol...
De-solder everything from the logic board. On my headphones the buttons and logic board were in the right cup and the battery in the left, with the ...
Originally I had planned on using replacement switches for all 5 control buttons, but I was concerned that drilling 5 new holes (plus one for the micr...
Remember the speaker grills you pried off the speakers? You need them to keep the foam from pressing into the speaker cones, but they don't fit into c...
Run the battery cable, along with two short lengths of right-speaker wire through the right can, and solder everything back up. It should look like th...
The one downside to keeping the original control buttons from the bluetooth headphones is that the bottom is essentially a flat surface, while the hea...
Enjoy not being deafened by machine noise while still getting to listen to your favorite music or podcasts.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
alvin_lee says:
Feb 9, 2013. 11:24 PMReply
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »