How to make conductive thread

Step 1 Materials required

In order to make this type of thread you will need the following:

1: 2 feet 1x4 cut into 3 pieces, 1-1 foot and 2 - 6 inch
2: 30 inches of 5/8 copper tubing (feel free to substitute)
3: stiff wire coat hanger or 5/16 brass dowel
4: Magic Bullet (tv blender) shaker lid or plastic salt shaker lid
5: 8 small circuit relays or very fine magnet wire.
6: fine cotton thread
7: 10 5/8 id washers
8: 2 fender washers
9: 1/2 inch sheet metal screws.

Tools needed:

1: Drill
2: small hammer:
3: small flat screwdriver
4: small wire cutters.
5: Dremel tool with cut-off wheel or drill press.
6: tubing bender
7: Hot glue gun