Introduction: How to Make Custom Sticker or a Small Logo

Picture of How to Make Custom Sticker or a Small Logo

hi guys,

well.. the title says it all, after watching this instructable you can make any sticker

Step 1: Things You Will Need

Picture of Things You Will Need

you will need :

  1. scissors
  2. industrial transparent tape or some transparent tape
  3. a computer
  4. printer
  5. glue stick
  6. A4 paper
  7. crafting skills and patience

Step 2: Getting a Logo

Picture of Getting a Logo

google is your friend. so go online and search for your favorite image that you want to make a sticker out off. i am a huge fan of Deadmau5 do i searched up the internet for a logo of Deadmau5. you can use any logo untill the size is around 5 x 5 cm (since the tape that we are going to use is 5 x 5 cm)

Step 3: Editing and Printing

Picture of Editing and Printing

make any changes that you want to in gimp and cut the image and paste it in wordpad of office word.

resize the image.

Step 4: Cutting and Crafting

Picture of Cutting and Crafting

after printing the image you can cut it to the size shown in the picture.

take the tape and pull out the take rapidly so that you don't see any lines on the tape and it is clear.

take the cut out picture and slowly stick the picture to the tape

Step 5: More Cutting

Picture of More Cutting

cut out all the extra tape so that you get a glossy finish.

Step 6: Sticking

Picture of Sticking

i used a glue stick in this project sine it will not spoil the surface and can be removed when ever you desire, but at the same time stay in place.

Step 7: That's It. All Done

Picture of That's It. All Done

once you have the glue at the back you can stick it anywhere you want. i stuck it on my laptop and it looked great !!

do comment and share your ideas so that i can make this better. cheers !!


rrekart (author)2014-02-16

Hope this link works: (see also,
Likely not nearly as fun to make but It's a little more professional looking, if that matters.

About This Instructable




Bio: just another guy who loves to make things ;)
More by saisrirama karthikeya:How to make custom sticker or a small logo
Add instructable to: