Introduction: How to Make Inverted Fishtail Loom Bracelet
What you will need:
A loom or your fingers
40 rubber bands
A C or S clip
Two extra bands
Step 1: Step 2
Get one of your rubber bands and twist so it is in the shape of a figure 8 and place it on 2 pegs that are on the loom. Then put two other bands on that aren't in a figure 8. Now get your pick and grab each ends of the figure 8 and place them on the top of the bands as shown in the pictures.
Step 2: Step 3 the Inverted Stitch
Now put another band on and get your pick go under the two top bands, grab the bottom one and bring it over both bands at both ends.
Step 3: Step 3
Continue doing this until you only have the three rubber bands on the loom. Then just do the thing to the bottom band like the rest of them. Now get 1 of the extra bands and do the inverted stitch to the bottom band. Now get the last extra band and put it on and do the same thing to the bottom band.
Step 4: Step 4 Wear It
Now you need to take of the bracelet then take out the extra bands and then put on a clip and now you can wear it.