Instructables
Picture of How to make moonshine
WARNING!!!!!
this is for informational purposes only and should not be used for illegal activities. there are many legal things one can do with a still including fueling cars (must register with the federal government) as well as extracting essential oils from plants (not necessary to register). also, implementing the following procedures could result in bodily harm from explosions, fires, burns, not to mention what could happen if you actually consume your final product. use your head, be careful and be safe. 


Thank you to everyone who has made this a successful Instructable!  I appreciate the views and positive feedback.  Please cut me some slack where I am lacking.  I have recently updated to include a few more specifics, but this does not take the place of doing your own research.  I am not an expert, though I play one on TV.  I am also toying with a discussion forum for all the numerous repeat questions.  Please continue to check the comments discussions before posting questions.  Many have been answered before and plenty more than once.


as a further note, i have decided to add this link to clear up any misunderstandings about what United States law has to say about distilling. Hopefully this will make some of you think a little harder about this and the rest to stop posting comments debating the legality of this. This is ONLY for the US.

Distilling Code

let's begin.

anything alcoholic can be distilled. i've distilled everything from my own moonshine washes to jug wine purchased at my local liquor store. distillation is actually quite simple. the hard part is making sure you are getting ethanol and not methanol (or the like). in this instructable i will show how i made a wash, fermented it, and consequently--the most important part--how i distilled it. i have added more specifics in order to answer some of the most asked questions i've gotten in the comments.  i hope this helps. i might also mention that everything here is hypothetical and for informational purposes only. hope that covers the bases.

and. . . let's begin. for real this time.

(if this doesn't make sense or you would like more info, check out my instructable--distilling basics--for more detailed information on the distillation process or read through the comment strings before posting a question.  I get repeat questions constantly and I don't have time to answer the same questions over and over.  Sorry.)
 
Remove these adsRemove these ads by Signing Up
1-40 of 968Next »
mchase14311 months ago
What do I need to do to get a much higher proof. I'm wanting something like 170-180 proof?????

get a fancy column to raise the proof.

raising the proof removes the flavor and makes it a strong "neutral" spirit.

ga. savian24 days ago

Hi very useful your post so I changed sugar for potatos. I have a question "following the chemistry" is right say more yeast will make the process to be more fast ? Idiiot question, but Is my first time.

if you use potatoes, you need to convert the potatoes from starch to sugar with a an enzyme.

you can use amalyase concentrate or replace 20% of the potatoes with malted barley and carry out a mash process.

OR, you can put in sugar according to the recipe (2lbs sugar per gallon water) and then add a bunch of potatoes to get the potato flavor - this is called an "adjunct" and the potatoes don't really ferment, they just add to the taste of the brew.

seb11885 years ago
i strongly advise against making this. nobody here seems to fully understand the science so this is definitely NOT a reliable guide to not permanently damaging your body. if you must make it, test it on a pet first. then wait two weeks. if it's still alive and fully functioning, drink up!
mikemostly seb118811 months ago
I'm a PhD chemical engineer, feel free to ask me about the science...

How can I increase the efficiency of my still, the distillate is 130 proof

on the second run

Theory says: increase the length of the column, or pack a short column with copper pot scrubbers or marbles.

In this case the column is the copper tube running from the top of the pot to the condenser. If this were made longer, the distillate would be stronger.

what is the ratio of sugar to water to yeast for a simple wash?
testing on animlas is not nice! :-s

Hogs like it fine. Most corn silage silos have a hog pen next to it. ~:-}

Draxis ninja1235 years ago
(removed by author or community request)
ninja123 Draxis5 years ago
we are not talking here about of cure of any kind of disease, is about an illegal substance just to get high...pets don't asked for it....
Draxis ninja1235 years ago
my bad, i guess...
deuZige seb11885 months ago

If you only use Sugar in the wash the chance of getting methanol are 0! It's the pectine in the other sugar sources like fruit or corn or patatoes that turns into the methanol. Even then percentages of methanol are very low and chucking the first 200ml will always remove any risk.

scoonr seb11882 years ago
surely you jest about using your pet for a test subject. I have researched the moonshine making subject quite a bit. Although I am still a bit leery about the heads and tails as it does sound like a crap shoot of sorts. But pdub77 has explained it with some scientific content that makes sense. I would like to find some boiling point information that corresponds to elevation as well. do any of you know of such a document.
pdub77 (author)  scoonr2 years ago
This is far from a crap shoot, but I still would be careful. With boiling points in mind you are really pretty safe. Check out my Instructable "Distilling Basics" for another view. Here is something I found that might help you with your altitude question:

http://gillesenergies.webs.com/boilingpointaltitude.htm

And for the record I would test nothing on a pet. I only have fish and I can never tell when they are drunk anyway. . .
A) are you kidding?  Alcohol in its various forms has been made for well over 4000 years by peoples who initially had no concept of science.  In most every society there has been a 'discovery' of some sort of alcoholic beverage or substrate that is consumed for pleasure, religious events, and because it was safer then stream/well water.

B) the author lists this as the THEORETICAL process (though it is funny how closely it follows the non-theoretical)

C) as far as safety is concerned.  The author very clearly defines which liquids boiling temperatures are okay to keep. 
And while I no way condone the practice, should one wish to do the same process utilizing a martensitic stainless pot etched and pitted from ionized water to boil your liquid and an ABS pipe filled with rusty steel wool as a condenser, one would still be fine.  As long as the set parameters for dumping heads and tails are maintained to an exactness met by any household instant read digital thermometer.

D) you should be ashamed for suggesting that one force a pet to drink an alcoholic beverage
pdub77 (author)  TANZMEISTER4 years ago
TANZMEISTER:  I could not agree more.

Seb1188:  My science is sound and my method works.  I also made plenty of disclaimers and encourage extra research on one's own.  I will concede that this can be dangerous, but as I have done it, it is not.  Thanks, though.

A little trick when bending copper. Plug one end of the copper with a piece of scrap wood, Fill the copper piping with dry sand, ensuring that the sand is well compacted , banging the end where the wood plug is on the ground works well. When the copper pipe is filled with sand plug the other end using more scrap wood. Then bend your copper pipe.

Really cool

mountain mike3 months ago

In my first steps of fermentation, I do NOT use an airlock for the first 3 to 4 days. I actually pump in air with a aquarium air pump with a filter on it. This will BOOST the activity of the yeast 10 fold. I then air lock it and usually ready in 7 to 10 days.

Throw away at least the first 50mls. per gallon to avoid most methanol. Methanol is hard to produce in any quantity with sugar and water only.

rfreeman103 months ago

http://www.hkescortplace.com/

SBmoonshine6 months ago

You can buy Moonshine from a licensed bottler who can buy shine from a legal manufacturer and bottle it for you and your legal company. Make an agreement with distribution companies and start selling in liquor stores once the State approves of your formula. For a quarter million you can go into business. One 750ML bottle only costs about 2.00 plus bottling costs of 2 bucks and federal tax of $2.68.

Tferguson284 years ago
I've unsucessfully made many batches of shine and can't figure out what i'm doing wrong. I've been using corn, sugar, yeast, and water for my mash and let is sit for 3 days to ferment.(whether that's right or wrong i got it from a website) well any way when i try to distill it, it comes out cloudy not clear and definitly not drinkable. plus i've tried to keep my temp at 173 degress F. but nothing happens till about 200. there is some alcohol in the wash and when it comes out of the still but not much. Can any one tell me what i'm doing wrong?
pance Tferguson286 months ago

pdub is right they yeast would not even finished multiplying even turbos take longer then that to ferment, but once you get it keep it up soon you won't buy likker at a store i know i havent in a long time.

pdub77 (author)  Tferguson284 years ago
3 days is never enough time to ferment.  Try two to three weeks. 
okay i didn't think it was long enough but i wasnt sure thanks. I'll let you know how it goes

Great post. If anyone is looking for moonshine stills for sale, check out Makin' Moonshine's moonshine still guides http://www.makinmoonshine.com/moonshine-stills-for-sale/. Solid info on moonshine stills and commercial moonshine still manufactuers. 'Shine on!

ebbisaac8 months ago

How much yeast did you use in the wash?

shadowshine10 months ago
Thank ya sir, your information was very thorough and enjoyable to read!
mchase14311 months ago
No it doesn't have any color. It is perfectly clear. I tried running it through a carbon filter and it actually helped a lot. ????
There you go, problem solved!
mchase14312 months ago
What if it had a taste kind if like kerosine???? It's 150 proof???
It could mean you have a high concentration of fusel alcohols which can usually result from heating your pot too quickly, not watching the temperature, or not having a long enough column to condense them out. If done right, your product should be a completely clear liquid (does yours have a yellow hue to it?) that will taste and smells like nothing but really strong alcohol. It probably wont hurt you to drink (you'll get a worse hangover than normal) but if it were me, personally, I'd scrap it and try again. Better safe than sorry.
just made my first batch of spirit. got 500ml out of 1 gallon wash. just need to know roughly how much water to add, and do i add water to spirit or spirit to water. only did a gallon because that size of my pressure cooker. ive added some pics of my set up. please help.
IMG_0808.jpgIMG_0805.jpgIMG_0806.jpgIMG_0807.jpg
There's no way to tell you from your pictures/set up/run (good idea with the pressure cooker though). There are too many variables like your mash ABV, column size, run temperature, and run length. I'd recommend you buy a hydrometer to test your final product proof to make sure you always know where you're at (they're really easy to use and not all that expensive). Experienced moonshiners can shake their product and guess proof (the air bubbles on the surface after you shake it disappear more quickly the higher the proof is) so what you could do if you don't want to invest in a hydrometer is buy a bottle of 80 proof vodka, shake it, shake your shine, compare the two, and add water to your shine until the two have bubbles that behave the same. If the bubbles on the surface of your shine last longer than that of the vodka you're already below 80 proof and shouldn't cut it with any water.
~KGB~2 years ago
Do you actually have to use malt or is it ok just to use: yeast, corn meal, water and sugar? Also, how much of each component would you need for about a 1Ltr kettel? Thanks...
mikemostly ~KGB~12 months ago
Anything with sugar in it for the yeast to eat will do. A mixture of sugar and water works fine but it's rather boring (about about 1.5 to 2 cups sugar in a liter of water should be a good starting point). You can get a bit more festive and do something like pick up some apple juice and add a 1/2 cup sugar per liter and ferment that for a bit of flavor and a nice smell to the shine. Yeast wise I'd only use a small sprinkle for a liter of mash say 1/4 to 1/2 tsp.
what does it mean if you are boiling the stuff and it passes 174 and stops at 200 but is still producing spirts? is it still safe to drink?
1-40 of 968Next »