Print PDF
Favorite
Email
Step 6Drill and screw!
Drill at the places you marked, and try to make sure that the you get the bit centered by the width of the 1'9" pieces. You should end up with 8 holes (2 on each corner). Put a screw in each hole.
The four pieces should make a perfect square with 90 degree corners. Use the T - Square to check this is the case as you go.
The four pieces should make a perfect square with 90 degree corners. Use the T - Square to check this is the case as you go.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
