How to make your own Fallout 3 helmet prop!

Step 3 Cutting and Folding

 

This is a tutorial on how to fold the lines on Pepakura correctly and clean.
Cut only the Solid lines!!! do not cut the dotted ones!!
Picture coming soon

1. Your going to need 2 Pens and a ruler. Make sure that the 2 pens are each different colors.)

2. You must assign the pens to a certain fold. (remember you must keep them the same through out the procedure)

Example:
Red Pen = Valley fold lines (--- - --- - --- - --- -)
Blue Pen = Mountain fold lines (- - - - - - - - - - - -)

3. Cut out the piece you are going to be folding.

4. Set up the Ruler so it is parallel to the line you are going to score, make sure that it is a bit close.

5. Then your going to want take the pen you assigned to valley fold or mountain fold and go over the line 3 or 4 times pressing semi hard with the ruler as a guide to keeping the pen straight and on the original line. 

6. Once you have done that you may fold the paper accordingly to come out as a nice clean fold.

Yes this may add more time to the making of your helmet, but in the end you are stunned with a nice looking piece.